PPM - Precision and Custom Instruments

Designs and manufactures rugged, precision electronic instruments for field, laboratory and manufacturing/production test. Specialized Instruments Include Resistance Measurement, Metrology & Calibration, Electronic Loads, Electrical Safety Test System and Multi Channel Voltage.



(Update - Kepco and Tegam now Manufacture and market the PPM Range of Instruments and Equipment)



PPM - Precision and Custom Instruments







BOP are high speed power operational amplifiers that can be used to provide dynamically agile voltage for test and simulation. They are not general purpose power supplies. By the nature of the bipolar high speed design, they do not have any energy-storage noise discriminating output capacitors.



Electronic Load and Power Supplies -Kepco



The Model R1L-C is a Ground Resistance Ohmmeter designed to measure grounding system resistance as well as soil resistivity, over ranges from 2 Ω to 20 kΩ full scale.







Ground Resistance Ohmmeter - Tegam

LCR Electronics - EMI and EMC Products

EMC testing, EMI Filter design, development and manufacturing. Complete range of high quality standard and custom EMI filters (RFI filters, EMC filters), Motor Controls and Electronic Controls.

The also offer EMC testing, engineering and contract manufacturing services.



LCR Electronics - EMI and EMC Products



LCR designs and manufactures custom and standard backplanes, card cages, chassis and sub-system enclosures too.





LCR Electronics, Inc. 9 South Forest Avenue, Norristown, PA 19401

Florite - Process Control Instruments

Universal Process Control Instrumentation Solutions. The Products include Model N920 an Embedded Controller which is a System card mountable design. These are microcomputer-based instruments which are highly configurable for analog/digital inputs and outputs.

Florite - Process Control Instruments

The Model N920 is an embedded version of the 900 Series instrument incorporating user selectable digital and analog inputs, as well as analog and relay outputs.



N920 Universal Embedded Process Controller

Process control functions are programmed manually or by using local or remote serial commands. Inputs are accepted from analog or digital signal sources, and current, voltage or relay outputs are available.

Programmable set-points include quantity, high/low/average flow rates, time in service and are used to trigger the indicators, signal output, and invoke local and remote alarm reporting.

Florite Inc.
25574 Rye Canyon Road, Suite G
Valencia, California 91355, USA.

IXYS Semiconductors - Power and RF

Develops and Manufactures products to improve power conversion efficiency. Integrated circuits and RF power devices. ASICs, Pulsed Power Systems and Laser Diode Drivers also in their product portfolio. RF

IXYS Semiconductors - Power and RF

They have HVIC chips for medical, telecommunication and power management applications including off AC line LED drivers. They also Zilog family of MCU's after Zilog Corporation became an IXYS Company.



They have under their Umbrella ...

MicroWave Technology, Inc. is a leading manufacturer of RF & Microwave Discrete Semiconductor Products.

Clare, Inc., A leader in the design and manufacture of solid state relays and high voltage integrated circuits. Shown on right is the IXDN609 a 9 Amp Low-Side Ultrafast MOSFET Driver.

Founded 1983, Corporate headquarters in Milpitas, California.

Address -1590 Buckeye Drive Milpitas, CA 95035-7418 United States.

MTL Instruments - Cooper Crouse-Hinds

Leading provider of Intrinsic Safety interfaces, surge protection, fieldbus systems and panel essentials like alarms and annunciators. These are used in process control applications.



MTL Instruments - Cooper Crouse-Hinds



News - The Honeywell Modbus Read-only Firewall is unique in the industry as it is the first fixed configuration firewall to use Tofino's "deep packet inspection" technology against the popular SCADA protocol, Modbus TCP.



Tofino MODBUS Read-Only firewall



This technology scans every network message, only allowing a very limited set of valid Modbus "Read-only" commands through to the safety system.







LED Series is a range of versatile, high-performance, surge protection devices.



LED Series surge protection - MTL Instruments



The fast acting circuitry will protect equipment from damaging electrical transients and disturbances. Fully automatic in operation the LED Series reacts immediately, clamping voltage surges without causing undue leakage losses under normal operation.

Automation Product Group - APG Sensors

Ultrasonic, Pressure and Level Control Products like Sensors, Transmitters and Controllers. Sensing technologies for the process control industries. Products include pressure sensors, liquid level sensors and digital pressure gauges.

Automation Product Group - APG Sensors

The DCR-1006A controller works together with our MNU ultrasonic sensors to allow simple level monitoring and control without the need of a more advanced system. It's also compatible with our DST ultrasonic sensors.



DCR-1006A Controller

This system performs reliably to meet your application needs today. With several sensors to choose from, and a variety of mounts, ranges, and outputs, there are plenty of options for your application needs.

Automation Products Group, Inc.
1025 W, 1700 N, Logan, Utah 84321-1713 USA