Showing posts with label Environmental-Instruments. Show all posts
Showing posts with label Environmental-Instruments. Show all posts

Wednesday, August 2, 2017

Enerac - Emission and combustion analyzers

A leading manufacturer of portable emission and combustion analyzers.  In 1979 they created the  first automated combustion efficiency analyzer - model 842.

Enerac - Emission and combustion analyzers

This is a low-cost, easy to use portable combustion efficiency emissions analyzer. Ideal for testing various combustion sources, such as boilers, burners, engines, turbines etc.

Helps determining the efficiency of a combustion source as well as for collecting advanced emissions data.

Enerac Model 500 - Emissions Analyzer

Enerac Model 500 - Emissions Analyzer

The Enerac 500 comes with free data collecting enercom software, time stamped internal data storage buffers and a built-in printer.

Enerac Inc.
1320 Lincoln Ave., Unit 1 Holbrook, NY 11741, USA

Monday, April 11, 2016

E+E Elektronik - Process Instruments

Development and production of Sensors, Transmitters and Instruments for measurement of relative humidity and air velocity. Humidity calibration systems.

E+E Elektronik - Process Instruments

Products include humidity sensors, CO2 sensors, moisture in oil, dew point, air velocity, flow and temperature sensors too.

Dew Point Measurements - EE35

"The EE35 Series is based on a functional, user-friendly housing concept and on the proven polymer humidity sensors of the HC Series. A specially developed autocalibration process enables measurements in a measurement range."

Dew Point Measurements - EE35 - E+E Elektronik

A specially developed autocalibration process enables measurements in a measurement range of -60...+60 degC Td with a Td measurement accuracy of ±2 degC.

Features Include
  • Measuring range: -60...60 deg C Td - 0...60 deg C T
  • Outputs: 0-5V, 0-10V, 0-20mA, 4-20mA
  • Accuracy: +/- 2 deg C Td - +/-0.2 deg C T
  • Supply: 24V AC/DC
E+E Elektronik GmbH
Langwiesen 7, A-4209 Engerwitzdorf, Austria.

Monday, February 16, 2015

ProMinent Group - Fluid Management

Products and Solutions for the metering technology and reliable water treatment. They manufacture products like Chemical Transfer Pumps, Disinfection and Oxidation Systems, Metering Pumps and Dosing Systems.



ProMinent Group - Fluid Management



They also have Electronic Systems for Measuring and Control, that includes Special Sensor Technology used for these Instruments.



History -



1960 - Start-up as "Chemie & Filter GmbH" by Prof. Dr. h. c. Viktor Dulger in Heidelberg. Main focus was the production of protective filters used in the pipeline systems of private homes.



1968 - Launch of the first electronic solenoid driven dosing pump "ProMinent electronic". The name ProMinent determined the present name of the company.



Multi-Parameter Controller diaLog DACa



Multi-Parameter Controller diaLog DACa



The diaLog DACa controller uses intelligent controller functions to close the control circuit between ProMinent DULCOTEST sensors and ProMinent metering pumps. The multi-parameter measurement and control device offers special functions for water treatment, such as the processing of variables and control parameter



ProMinent GmbH

Im Schuhmachergewann, 5-11 69123, Heidelberg, Germany.

Tuesday, May 13, 2014

Brüel & Kjær - Sound & Vibration Measurement

They design and manufacture equipment and instruments applied in the measurement-analysis of sound and vibration. These include Software and Systems used to study vibration.

Brüel & Kjær - Sound & Vibration Measurement

History -  In 1943 Brüel & Kjær launched Type 4301 - the world's first charge accelerometer - and entered the world of vibration measurement.

Sound Level Meter - Type 2240

Sound Level Meter - Type 2240

In just two seconds, the sound level meter is powered-up and ready to measure.

A low-cost, Class 1 sound level meter conforming to international standards. The three-button user-interface and large digital display make it easy to use for on-the-spot measurements.

Features Include

Class 1 measurement precision conforming to the latest standards.  Dynamic range: 30 - 140 dB in two 80 dB ranges.
  • LAeq, LAFmax, LCpeak, LAF
  • Handy and lightweight 
  • Large and clear display
  • 6 hour battery life from two AA cells
Older post in delabs

For over fifty years, LDS has specialized in high quality vibration test systems and has become a worldwide leading supplier. Test and Measurement. Dactron, Nicolet Technologies and Gould Instruments acquired by LDS.

LDS Test and Measurement 
  • 1958 - Patent for Electromagnetic Shaker
  • 1971 - Digital Transient Recorder
  • 1978 - Digital FFT Analyser 

Friday, April 11, 2014

Analytical Instruments - GE

GE Analytical Instruments, the analytical instrumentation arm of GE Water & Process Technologies, is the world’s leading manufacturer of analyzers and sensors used to measure total organic carbon (TOC) in water.



Analytical Instruments - GE



Solutions include - Total organic carbon (TOC) analyzers, Oil leak and spill monitoring systems, Quality System Optimization (QSO) for pharma/biotech, Boron analyzer for semiconductor and display......



InnovOx Laboratory Overview



(The Image above is a Collage of the Instrument Image along with the Web Interface Screenshot)



The Sievers InnovOx Laboratory Total Organic Carbon (TOC) Analyzer represents a true breakthrough in high TOC measurement technology and reliability. The InnovOx (short for innovative oxidation) can consecutively handle thousands of common-as well as difficult samples such as brine and cellulose-with unprecedented system uptime.



InnovOx Laboratory Overview



With the InnovOx, analysts can routinely test for Total Carbon (TC), Total Inorganic Carbon (TIC), Total Organic Carbon (TOC), and Non-Purgeable Organic Carbon (NPOC).



GE Analytical Instruments

6060 Spine Road Boulder, CO 80301, USA.

Tuesday, September 24, 2013

BAPI - Building Automation Products

BAPI products are designed, engineered and manufactured at their rural Wisconsin Gays Mills Facility. The futuristic products are around the HVAC needs like Temperature Sensors, Humidity Sensors, Pressure Sensors, Wireless Sensors and Air Quality Sensors.



BAPI - Building Automation Products



The Blü-Test is a handheld temperature & humidity measurement probe that interfaces via wireless Bluetooth to the user’s enabled Smart Phone or Tablet.



The wireless communication makes it easy to take readings from difficult locations. The 8” probe has a fast measurement time of 2 minutes in slow moving air. Each probe comes with a National Institute of Standards and Technology (NIST) traceable certificate of calibration.



Bluetooth Temp & Humidity Probe



Bluetooth Temp and Humidity Probe - BAPI



Using the Blü-Test App for the Android Phone or Tablet, you can monitor multiple points from the sensor. with a time stamp and location and even emailed for future reference or reporting.



Building Automation Products, Inc.

750, North Royal Avenue, Gays Mills, WI 54631 USA.


Tuesday, June 4, 2013

Elcometer Inspection and Testing Equipment

Manufacture and supply of inspection equipment to the paint, coatings and concrete industries. Design and development of new custom testing solutions. Products Include, Abrasion Testers, Coating Thickness, Ultrasonic Thickness, Half Cell Measurement, Picnometer, Concrete Covermeters, Washability Testers, Oven Temperature Recorders and others.

Elcometer Inspection and Testing Equipment

The Elcometer 215 Oven Data Logger system is an intelligent temperature data logging system typically used to monitor curing processes in the coating industry - improving production quality control and helping to reduce operating costs.

Elcometer 215 Oven Data Logger

Elcometer 215 Oven Data Logger

The logger measures temperatures and stores them for a specified amount of time. The instrument measures continuously but takes and saves readings at time intervals set by the user. The maximum recording period depends on the number of sensors being used and the specified recording interval.

Elcometer Limited
Edge Lane Manchester M43 6BU United Kingdom

Friday, April 1, 2011

KROHNE - Process Measurement Instruments

Krohne designs, develops and manufactures Process Instruments for Industrial Applications.



KROHNE - Process Measurement Instruments



The products include Instruments such as Variable area flowmeters, Vortex flowmeters, Radar level meters for Indsutries in Oil & Gas, Water & Wastewater, Chemicals, Power, Pharmaceuticals etc.



MAC 100 Multiparameter converter for liquid analytical measurements. This Employs the KROHNE General Device Concept (GDC)



MAC 100 Multiparameter converter



Standardised operating concept from flow and level extended to analytical parameters



Features Include


  • Up to 2 sensor inputs + temperature input

  • 3 current outputs

  • Large graphic display

  • Robust aluminium housing (IP66)

  • Build-in temperature and pH compensation

  • Calibration logbook

  • HART (in preparation)


KROHNE Messtechnik GmbH

Ludwig-Krohne-Str., 5 47058, Duisburg, Germany.

Tuesday, March 8, 2011

PerkinElmer - Human and Environmental Health

Life and Analytical Sciences and Optoelectronics. Design, manufacture and support advanced scientific research and technology solutions. These are used in Health, safety and environmental quality Labs. Labs and Agencies that test and moderate clean water and air, ensure safety in food and toys too.


PerkinElmer - Human and Environmental Health


LAMBDA XLS+ with Printer - PerkinElmer


LAMBDA XLS+ with Printer - PerkinElmer


Split beam operation ensures high stability and run-to-run reproducibility. Higher resolution (3 nm bandwidth) version of the LAMBDA XLS.


UV/Vis Spectrophotometer. Compact design with integrated thermal printer uses minimal bench-space. Full suite of measurement modes: single and multi-wavelength modes, scanning, and kinetics.

Wednesday, March 2, 2011

Delta OHM - Process and Environmental Instruments

Electronic instruments for the measuring of the following parameters: Temperature, Relative Humidity, Pressure, Light, Acoustics, pH, Conductivity, Dissolved Oxygen and Wind speed.



Delta OHM - Process and Environmental Instruments



The HD2106.1 and HD2106.2 are portable instruments with a large LCD display They measure conductivity, liquid resistivity, total dissolved solids (TDS) and salin ity using combined 4-ring and 2-ring conductivity/temperature probes. Temperature only is measured by Pt100 or Pt1000 immersion, penetration or contact probes.



HD 2106 Conductivity Meters - Thermometers



HD 2106 Conductivity Meters - Thermometers



The HD2106.2 is a datalogger. It memorizes up to 36,000 conductivity and temperature samples that can be transferred from the instrument connected to a PC via the multi-standard RS232C serial port and USB 2.0. The storing interval, printing, and baud rate can be configured using the menu.



Delta OHM

S.r.L. Via G.Marconi, 5 - 35030 Caselle di Selvazzano, Padova (PD) ITALIA

Saturday, October 2, 2010

HANNA instruments - Analytical Instrumentation

Full range of test equipment for pH, conductivity, TDS, ion specific, turbidity, and other water quality parameters.

HANNA instruments - Analytical Instrumentation

"In 1985, HANNA was the first company to incorporate a temperature sensor (HI1217S) with a pH electrode, which very quickly became the standard throughout the world..."

HI-2030 edge Hybrid Multiparameter EC Meter

edge measures pH, conductivity and dissolved oxygen through  its unique digital electrodes. These digital electrodes are auto-recognized. Providing sensor type, calibration data and a serial number, and they connect to edge with an easy to plug-in  3.5mm connector. edge’s versatile design is equally at home in your hand, on a lab bench or mounted on a wall.

HI-2030 edge Hybrid Multiparameter EC Meter

edge simplifies measurement, configuration, calibration, diagnostics, logging and transferring data to a computer or a USB drive. edge is equipped with a benchtop  cradle with an adjustable swivel electrode holder to charge and  hold the edge securely in place at the optimium viewing angle.

HANNA instruments
Rhode Island 584 Park East Drive Woonsocket, RI 02895, USA

Friday, October 1, 2010

TSI - Precision Measurement Solutions

TSI - Precision Measurement Solutions

  TSI - Precision Measurement Solutions

PIV, LDA, PDA, and HWA systems for Fluid Mechanics and Fluid Flow research. Based in St. Paul, Minnesota, USA.



"TSI partners with research institutions and customers around the world to set the standard for measurements relating to aerosol science, air flow, indoor air quality, fluid dynamics and biohazard detection. With headquarters based in the U.S.."



TSI AEROTRAK 9306 Handheld Particle Counters



Low cost and versatile particle contamination monitoring. AEROTRAK Model 9306 reports up to 6 particle sizes simultaneously along with the environmental data, includes an internal alarm.



The internal memory can store up to 10,000 sample records of particle count data which can be conveniently viewed on screen,



Features Include


  • Complies with all requirements of ISO 21501-4

  • 0.3 to 25 μm size range

  • 0.1 CFM (2.83 L/min) flow rate

  • Measures up to six channels of simultaneous data

  • USB and Ethernet output


TSI Inc

500 Cardigan Road, Shoreview, MN, 55126, U.S.A.

Friday, June 4, 2010

Sanwa Electric Test Instruments

One of the Manufacturers of Good Quality and Affordable Electrical Test Instruments from Japan. They have been manufacturing reliable test equipment for many decades. - delabs

Sanwa Electric Test Instruments

Digital Multimeter, Analog Multitester, Insulation Resistance Tester, Earth Tester, Laser Power Meter, Lux Meter, Thermo Meter, Tacho Meter, Phase Detector.

Sanwa Digital Volt Tester KP1(CAT.IV 600V)

IEC61010 CAT.IV 600V pocket size Digital Volt Meter,  AC/DC auto-identifying voltage measurement, AC measurement in True RMS. EF (Electric Field) detection

Sanwa Digital Volt Tester

History -

1941 - Sanwa Denki Keiki Seisakusho established as a company manufacturing and selling diagnostic tools, or multi-testers (circuit testers) for use in equipment repair, following the increased popularity of radio receivers. (Koganei-machi, Kitatama-gun, Tokyo)

Sanwa Electric Instrument Co., Ltd.
Dempa Bldg., 4-4 Sotokanda 2-Chome, Chiyoda-ku, Tokyo 101-0021 Japan

Thursday, October 1, 2009

SKC - Sampling Technologies - Air Quality

SKC serves the Industrial Hygiene, Safety, Environmental and Occupational Health markets by providing air sampling instruments and sample collection media



SKC - Sampling Technologies - Air Quality



Here is a portable, indoor environmental air monitoring station can be configured for up to 14 simultaneous air measurements including standard configuration of PM10 or TSP, CO2, CO, temperature, and relative humidity.



HAZ-SCANNER: Portable Measurements



HAZ-SCANNER: Portable Measurements



The IEMS displays real-time reading with datalogging capabilities. Configure IEMS for up to 14 simultaneous critical indoor measurements. Optional wireless data acquisition for continuous unattended sampling up to one mile is available.



The standard HAZ-SCANNER IEMS includes the monitor with an impactor for PM10 sampling and sensors for TSP particulates, CO2, CO, relative humidity, and temperature, a 12-V NiMH battery, charger, HazComm Pro Software, cables, and CD with instructions.



SKC Inc.

863 Valley View Road Eighty Four, PA 15330 U.S.A.

Vaisala - Weather monitoring systems

They develop and manufacture products and services for environmental and industrial measurement.

Vaisala - Environmental and Industrial Systems

Vaisala's origins date back to the 1930's when Professor Vilho Väisälä, Vaisala's founder and long-time managing director, invented some of the operating principles of a radiosonde. He sent the first Finnish radiosonde aloft in December 1931....History - Vaisala

Humidity and Temperature Transmitter Series HMT330

Humidity and Temperature Transmitter Series HMT330

The HMT331 is the top-of-the-line wall-mounted transmitter for demanding HVAC and condition monitoring applications.

"The instrument offers a wide variety of different psychrometric units, including dew point, enthalpy, wet bulb temperature, absolute humidity, and mixing ratio."

Vaisala Oyj
Vanha Nurmijärventie 21, 01670 Vantaa
P.O. Box 26, FI-00421 Helsinki, Finland

Friday, September 4, 2009

Sensidyne - Air Monitoring systems

Sensidyne was founded in 1983 as a manufacturer and distributor of gas detection equipment. In 1995, the Gilian Instrument Company was acquired to expand the existing line of vapor and particulate personal sampling pumps.

Sensidyne - Air Monitoring systems

Sensidyne is a leading provider of gas detection systems designed to detect toxic and combustible gas levels in ambient air in a variety of industries.

Sensidyne Technical Library

Library of Technical of Manuals and Support Documents for Sensidyne Products

The products the design and manufacture include - Sound and Vibration Instruments, Air Sampling Pumps and Equipment and Gas Detection Sensors and Instruments.. They also have some specialized instruments like the Sensidyne CDEM-1000  a Portable, Direct-reading Coal Dust Explosibility Meter.

Sensidyne Nephelometer - Aerosol Monitor

Sensidyne Nephelometer - Aerosol Monitor 

The Sensidyne Nephelometer is an advanced real-time dust monitor (aerosol monitor) accurately measuring dust concentrations using proven light scatter technology.

This portable instrument accurately measures and records dust from 1-10,000 μg/m3 with resolution to 1 μg/m3. Sample modes are selectable between 60 second sample, 15 minute STEL, or continuous sampling.

Sensidyne, LP
1000 112th Circle North, Suite 100 St. Petersburg, FL 33716 U.S.A.

Thursday, April 2, 2009

HORIBA - Process Instruments and Test Systems

Instruments and systems for applications ranging from automotive R&D, process and environmental monitoring, in-vitro medical diagnostics, semiconductor manufacturing and metrology.



HORIBA - Process Instruments and Test Systems



"The hand-held IT-540 is a non-contact, thermal-radiation-type thermometer....It is ideal for remote temperature measurement in dangerous applications such as monitoring abnormal heat generation in high-temperature voltage transformer equipment.."



IT-540 Series handy Non-Contact Infrared Thermometers



IT-540 Series handy Non-Contact Infrared Thermometers



Features Include


  • Measurement temp range: -50 to 500°C(-58 to 932°F)

  • Response time: Less than 1.5sec (95% response)

  • MAX/MIN values displayable, Data Hold, Selection of °C and °F

  • Detector/Optical lens: Thermopile /Silifcon


HORIBA, Ltd.

2, Miyanohigashi, Kisshoin, Minami-Ku, Kyoto, 601-8510, Japan